New Holland Tc24d Brake Safety Switch
RBrame
Join Date: Apr 2009 Posts: 2 Pittsburgh, Pa. |
2009-04-28 162375
I have a TC24D with an attached backhoe. When I apply the parking brake,the indicator light doesn't always come on. When I leave the seat to operate the backhoe the kill switch under the seat kills the motor in 2 seconds. Is therea Parking brake safety switch that could be faulty or need adjusted? If so where is this switch located? Any help would be appriciated. Thanks
Reply to | Quote Reply | Add Photo
New Holland Tc24d Brake Safety Switch
earthwrks
Join Date: Dec 2003 Posts: 3853 Home Office in Flat Rock, Michigan Pics |
2009-04-28 162379
Follow the brake pedla lingaeand ther you will find the swicth. It may be out of adjustment, have a bad or loose connection, or a bad switch.
The seat swicth is doing its job when you leave the seat. You could use a bungy strap to hold the seat down, or like I do with my skid steer, install a toggle switch in the seat circuit that makes the system think you're still in the seat. My buddy does a similar thing with his skid steer seat switch, only he disconnected it and uses a short jumper in the connector to take the place of the switch. If your New Holland is anything like my TC33D, LOL eventually you won't even need a seat switch since the wiring and safety module usually go bad in no time. Mine went bad after less than 100 hours. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This